PHiLIP
stm32f1xx_hal_conf.h
Go to the documentation of this file.
1 
35 /* Define to prevent recursive inclusion -------------------------------------*/
36 #ifndef __STM32F1xx_HAL_CONF_H
37 #define __STM32F1xx_HAL_CONF_H
38 
39 #ifdef __cplusplus
40 extern "C" {
41 #endif
42 
43  /* Exported types ------------------------------------------------------------*/
44  /* Exported constants --------------------------------------------------------*/
45 
46  /* ########################## Module Selection ############################## */
51 #define HAL_MODULE_ENABLED
52 #define HAL_ADC_MODULE_ENABLED
53  /*#define HAL_CRYP_MODULE_ENABLED */
54  /*#define HAL_CAN_MODULE_ENABLED */
55  /*#define HAL_CEC_MODULE_ENABLED */
56  /*#define HAL_CORTEX_MODULE_ENABLED */
57  /*#define HAL_CRC_MODULE_ENABLED */
58  /*#define HAL_DAC_MODULE_ENABLED */
59 #define HAL_DMA_MODULE_ENABLED
60  /*#define HAL_ETH_MODULE_ENABLED */
61  /*#define HAL_FLASH_MODULE_ENABLED */
62 #define HAL_GPIO_MODULE_ENABLED
63 #define HAL_I2C_MODULE_ENABLED
64  /*#define HAL_I2S_MODULE_ENABLED */
65  /*#define HAL_IRDA_MODULE_ENABLED */
66 #define HAL_IWDG_MODULE_ENABLED
67  /*#define HAL_NOR_MODULE_ENABLED */
68  /*#define HAL_NAND_MODULE_ENABLED */
69  /*#define HAL_PCCARD_MODULE_ENABLED */
70  /* #define HAL_PCD_MODULE_ENABLED */
71  /*#define HAL_HCD_MODULE_ENABLED */
72  /*#define HAL_PWR_MODULE_ENABLED */
73  /*#define HAL_RCC_MODULE_ENABLED */
74 #define HAL_RTC_MODULE_ENABLED
75  /*#define HAL_SD_MODULE_ENABLED */
76  /*#define HAL_MMC_MODULE_ENABLED */
77  /*#define HAL_SDRAM_MODULE_ENABLED */
78  /*#define HAL_SMARTCARD_MODULE_ENABLED */
79 #define HAL_SPI_MODULE_ENABLED
80  /*#define HAL_SRAM_MODULE_ENABLED */
81 #define HAL_TIM_MODULE_ENABLED
82 #define HAL_UART_MODULE_ENABLED
83  /*#define HAL_USART_MODULE_ENABLED */
84  /*#define HAL_WWDG_MODULE_ENABLED */
85 
86 #define HAL_CORTEX_MODULE_ENABLED
87 #define HAL_DMA_MODULE_ENABLED
88 #define HAL_FLASH_MODULE_ENABLED
89 #define HAL_GPIO_MODULE_ENABLED
90 #define HAL_PWR_MODULE_ENABLED
91 #define HAL_RCC_MODULE_ENABLED
93  /* ########################## Oscillator Values adaptation ####################*/
94 
99 #if !defined (HSE_VALUE)
100 #define HSE_VALUE ((uint32_t)8000000)
101 #endif /* HSE_VALUE */
102 
103 #if !defined (HSE_STARTUP_TIMEOUT)
104 #define HSE_STARTUP_TIMEOUT ((uint32_t)100)
105 #endif /* HSE_STARTUP_TIMEOUT */
106 
112 #if !defined (HSI_VALUE)
113 #define HSI_VALUE ((uint32_t)8000000)
114 #endif /* HSI_VALUE */
115 
119 #if !defined (LSI_VALUE)
120 #define LSI_VALUE 40000U
121 #endif /* LSI_VALUE */
129 #if !defined (LSE_VALUE)
130 #define LSE_VALUE ((uint32_t)32768)
131 #endif /* LSE_VALUE */
132 
133 #if !defined (LSE_STARTUP_TIMEOUT)
134 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000)
135 #endif /* LSE_STARTUP_TIMEOUT */
136 
137  /* Tip: To avoid modifying this file each time you need to use different HSE,
138  === you can define the HSE value in your toolchain compiler preprocessor. */
139 
140  /* ########################### System Configuration ######################### */
144 #define VDD_VALUE ((uint32_t)3300)
145 #define TICK_INT_PRIORITY ((uint32_t)0)
146 #define USE_RTOS 0
147 #define PREFETCH_ENABLE 1
149  /* ########################## Assert Selection ############################## */
150 
154  /* #define USE_FULL_ASSERT 1U */
155 
156  /* ################## Ethernet peripheral configuration ##################### */
157 
158  /* Section 1 : Ethernet peripheral configuration */
159 
160  /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
161 #define MAC_ADDR0 2
162 #define MAC_ADDR1 0
163 #define MAC_ADDR2 0
164 #define MAC_ADDR3 0
165 #define MAC_ADDR4 0
166 #define MAC_ADDR5 0
168  /* Definition of the Ethernet driver buffers size and count */
169 #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE
170 #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE
171 #define ETH_RXBUFNB ((uint32_t)8)
172 #define ETH_TXBUFNB ((uint32_t)4)
174  /* Section 2: PHY configuration section */
175 
177 #define DP83848_PHY_ADDRESS 0x01U
178 
179 #define PHY_RESET_DELAY ((uint32_t)0x000000FF)
180 
181 #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
182 
183 #define PHY_READ_TO ((uint32_t)0x0000FFFF)
184 
185 #define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
186 
187  /* Section 3: Common PHY Registers */
188 
189 #define PHY_BCR ((uint16_t)0x00)
190 #define PHY_BSR ((uint16_t)0x01)
192 #define PHY_RESET ((uint16_t)0x8000)
193 #define PHY_LOOPBACK ((uint16_t)0x4000)
194 #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100)
195 #define PHY_HALFDUPLEX_100M ((uint16_t)0x2000)
196 #define PHY_FULLDUPLEX_10M ((uint16_t)0x0100)
197 #define PHY_HALFDUPLEX_10M ((uint16_t)0x0000)
198 #define PHY_AUTONEGOTIATION ((uint16_t)0x1000)
199 #define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200)
200 #define PHY_POWERDOWN ((uint16_t)0x0800)
201 #define PHY_ISOLATE ((uint16_t)0x0400)
203 #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020)
204 #define PHY_LINKED_STATUS ((uint16_t)0x0004)
205 #define PHY_JABBER_DETECTION ((uint16_t)0x0002)
207  /* Section 4: Extended PHY Registers */
208 #define PHY_SR ((uint16_t)0x10U)
210 #define PHY_SPEED_STATUS ((uint16_t)0x0002U)
211 #define PHY_DUPLEX_STATUS ((uint16_t)0x0004U)
213  /* Includes ------------------------------------------------------------------*/
214 
218 #ifdef HAL_RCC_MODULE_ENABLED
219 #include "stm32f1xx_hal_rcc.h"
220 #endif /* HAL_RCC_MODULE_ENABLED */
221 
222 #ifdef HAL_GPIO_MODULE_ENABLED
223 #include "stm32f1xx_hal_gpio.h"
224 #endif /* HAL_GPIO_MODULE_ENABLED */
225 
226 #ifdef HAL_DMA_MODULE_ENABLED
227 #include "stm32f1xx_hal_dma.h"
228 #endif /* HAL_DMA_MODULE_ENABLED */
229 
230 #ifdef HAL_ETH_MODULE_ENABLED
231 #include "stm32f1xx_hal_eth.h"
232 #endif /* HAL_ETH_MODULE_ENABLED */
233 
234 #ifdef HAL_CAN_MODULE_ENABLED
235 #include "stm32f1xx_hal_can.h"
236 #endif /* HAL_CAN_MODULE_ENABLED */
237 
238 #ifdef HAL_CEC_MODULE_ENABLED
239 #include "stm32f1xx_hal_cec.h"
240 #endif /* HAL_CEC_MODULE_ENABLED */
241 
242 #ifdef HAL_CORTEX_MODULE_ENABLED
243 #include "stm32f1xx_hal_cortex.h"
244 #endif /* HAL_CORTEX_MODULE_ENABLED */
245 
246 #ifdef HAL_ADC_MODULE_ENABLED
247 #include "stm32f1xx_hal_adc.h"
248 #endif /* HAL_ADC_MODULE_ENABLED */
249 
250 #ifdef HAL_CRC_MODULE_ENABLED
251 #include "stm32f1xx_hal_crc.h"
252 #endif /* HAL_CRC_MODULE_ENABLED */
253 
254 #ifdef HAL_DAC_MODULE_ENABLED
255 #include "stm32f1xx_hal_dac.h"
256 #endif /* HAL_DAC_MODULE_ENABLED */
257 
258 #ifdef HAL_FLASH_MODULE_ENABLED
259 #include "stm32f1xx_hal_flash.h"
260 #endif /* HAL_FLASH_MODULE_ENABLED */
261 
262 #ifdef HAL_SRAM_MODULE_ENABLED
263 #include "stm32f1xx_hal_sram.h"
264 #endif /* HAL_SRAM_MODULE_ENABLED */
265 
266 #ifdef HAL_NOR_MODULE_ENABLED
267 #include "stm32f1xx_hal_nor.h"
268 #endif /* HAL_NOR_MODULE_ENABLED */
269 
270 #ifdef HAL_I2C_MODULE_ENABLED
271 #include "stm32f1xx_hal_i2c.h"
272 #endif /* HAL_I2C_MODULE_ENABLED */
273 
274 #ifdef HAL_I2S_MODULE_ENABLED
275 #include "stm32f1xx_hal_i2s.h"
276 #endif /* HAL_I2S_MODULE_ENABLED */
277 
278 #ifdef HAL_IWDG_MODULE_ENABLED
279 #include "stm32f1xx_hal_iwdg.h"
280 #endif /* HAL_IWDG_MODULE_ENABLED */
281 
282 #ifdef HAL_PWR_MODULE_ENABLED
283 #include "stm32f1xx_hal_pwr.h"
284 #endif /* HAL_PWR_MODULE_ENABLED */
285 
286 #ifdef HAL_RTC_MODULE_ENABLED
287 #include "stm32f1xx_hal_rtc.h"
288 #endif /* HAL_RTC_MODULE_ENABLED */
289 
290 #ifdef HAL_PCCARD_MODULE_ENABLED
291 #include "stm32f1xx_hal_pccard.h"
292 #endif /* HAL_PCCARD_MODULE_ENABLED */
293 
294 #ifdef HAL_SD_MODULE_ENABLED
295 #include "stm32f1xx_hal_sd.h"
296 #endif /* HAL_SD_MODULE_ENABLED */
297 
298 #ifdef HAL_MMC_MODULE_ENABLED
299 #include "stm32f1xx_hal_mmc.h"
300 #endif /* HAL_MMC_MODULE_ENABLED */
301 
302 #ifdef HAL_NAND_MODULE_ENABLED
303 #include "stm32f1xx_hal_nand.h"
304 #endif /* HAL_NAND_MODULE_ENABLED */
305 
306 #ifdef HAL_SPI_MODULE_ENABLED
307 #include "stm32f1xx_hal_spi.h"
308 #endif /* HAL_SPI_MODULE_ENABLED */
309 
310 #ifdef HAL_TIM_MODULE_ENABLED
311 #include "stm32f1xx_hal_tim.h"
312 #endif /* HAL_TIM_MODULE_ENABLED */
313 
314 #ifdef HAL_UART_MODULE_ENABLED
315 #include "stm32f1xx_hal_uart.h"
316 #endif /* HAL_UART_MODULE_ENABLED */
317 
318 #ifdef HAL_USART_MODULE_ENABLED
319 #include "stm32f1xx_hal_usart.h"
320 #endif /* HAL_USART_MODULE_ENABLED */
321 
322 #ifdef HAL_IRDA_MODULE_ENABLED
323 #include "stm32f1xx_hal_irda.h"
324 #endif /* HAL_IRDA_MODULE_ENABLED */
325 
326 #ifdef HAL_SMARTCARD_MODULE_ENABLED
327 #include "stm32f1xx_hal_smartcard.h"
328 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
329 
330 #ifdef HAL_WWDG_MODULE_ENABLED
331 #include "stm32f1xx_hal_wwdg.h"
332 #endif /* HAL_WWDG_MODULE_ENABLED */
333 
334 #ifdef HAL_PCD_MODULE_ENABLED
335 #include "stm32f1xx_hal_pcd.h"
336 #endif /* HAL_PCD_MODULE_ENABLED */
337 
338 #ifdef HAL_HCD_MODULE_ENABLED
339 #include "stm32f1xx_hal_hcd.h"
340 #endif /* HAL_HCD_MODULE_ENABLED */
341 
342  /* Exported macro ------------------------------------------------------------*/
343 #ifdef USE_FULL_ASSERT
344 
352 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
353  /* Exported functions ------------------------------------------------------- */
354  void assert_failed(uint8_t* file, uint32_t line);
355 #else
356 #define assert_param(expr) ((void)0U)
357 #endif /* USE_FULL_ASSERT */
358 
359 #ifdef __cplusplus
360 }
361 #endif
362 
363 #endif /* __STM32F1xx_HAL_CONF_H */
364 
365 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/